Eneo DMR-104 Instrucciones de operaciones descargar pdf (Pagina 37)

Digital Video Recorder

DVRNS

Highlight DVRNS and press the

button, and the DVRNS setup screen displays.

Figure 20 : Network – DVRNS setup screen.

Highlight Use DVR Name Service and press the

button to toggle between On and Off.

NOTE: The DVRNS (DVR Name Service) allows the DVR to use Dynamic IP addresses for remote connection.

When this feature is On, you can access your DVR remotely using the DVR name instead of its IP address.

For the DVRNS feature, the DVR should be registered on the DVRNS server.

Highlight the box beside DVRNS Server and press the button. A virtual keyboard appears allowing you to enter

the IP address or domain name of the DVRNS server.

NOTE: You will need to get the IP Address or domain name of the DVRNS Server from your network administrator.

You can use the domain name instead of IP address if you already set up the DNS Server when setting

up the LAN.

Highlight the box beside Port and press the button. Set the port number of the DVRNS server using the Up and

Down arrow buttons to increase or decrease the numbers.

Highlight Use NAT and press the button to toggle between On and Off.

NOTE: When using the NAT (Network Address Translation) device, refer to the NAT manufacturer’s instructions

for the proper network settings.

Highlight the box beside DVR Name and press the button. A virtual keyboard appears allowing you to enter the

DVR name to be registered on the DVRNS server.

Highlight the Check box and press the button to check whether or not the name you entered can be used.

NOTE: The DVR name you entered should be checked by selecting Check, otherwise the DVRNS changes will

not be saved.

When entering no name or a name already registered on the DVRNS server, an error message displays.

Highlighting Save and pressing the button registers the DVR on the DVRNS server. Proper DVRNS settings will

display the help desk information of the DVRNS server in the box beside Help Desk.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 87 88

Sin comentarios

Eneo DMR-104 Instrucciones de operaciones Pagina 37