Eneo DMR-104 Instrucciones de operaciones descargar pdf (Pagina 40)

User’s Manual

Highlight the box beside Sender and enter the sender’s e-mail address. Use the virtual keyboard to enter the e-mail

address.

NOTE: The e-mail address must include the “@” character to be a valid address.

Highlight the box beside Recipient and enter the recipient’s e-mail address. Use the virtual keyboard to enter the e-mail

address.

Highlight the Test box and press the button to test emailing with the current settings you made.

iSCSI

Highlight iSCSI and press the

button. The iSCSI setup screen displays.

Figure 23 : Network – iSCSI setup screen.

Highlight Use iSCSI Name Service and press the

button to toggle between On and Off.

Highlight the DVR – Initiator Address box and press the button. Use the arrow buttons to enter the IP address of

DVR.

NOTE: You will need to get the IP address from your network administrator.

Do NOT use the same IP address for the Initiator Address set here and IP address set during Network –

IP Address setup, otherwise the iSCSI changes will not be saved.

Highlight the DVR – Initiator Node Name box and press the button. A virtual keyboard appears allowing you to

enter the DVR name to be registered on the iSCSI device.

Highlight the iSCSI – Target Address box and press the button. Use the arrow buttons to enter the IP address of

the iSCSI device that you are connecting to the DVR.

Highlight the iSCSI – Target Port box and press the button. Use the arrow buttons to enter the port number of

the iSCSI device that you are connecting to the DVR.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 87 88

Sin comentarios

Eneo DMR-104 Instrucciones de operaciones Pagina 40