Eneo KBD-2 Especificaciones descargar pdf (Pagina 21)

3.8 Initialization

Are you sure?

ENTER OR ESC

MAIN MENU

8. Initialization

To initialize the keyboard, select Initialization.

After Initialization, the keyboard returns it to the factory value.

3.9 HOLD TIME

MAIN MENU

9. Hold time: 005s

When the dome ID of the master keyboard is the same as the slave keyboard or the one from AUX IN mode (dome2 port), during the hold time after the master

keyboard control the dome, the slave keyboard and the unit from the AUX IN mode (dome2 port) cannot control the dome.

INF (Inﬁnite) Slave Keyboard user never has the right to control the dome which is selected by master Keyboard users.

1 ~ 200 second After select hold time, the slave keyboard can control the dome.

When the dome ID of the master keyboard is not the same as the slave keyboard or the one from AUX IN mode (dome2 port), the hold time has no relation.

Ver x.x Slave1

Password: xxxx

<– Current Device ID = 1

<– Default setting is 9 9 9 9 for administrator, 1 1 1 1 for user

4. Slave Keyboard Setup

Master Keyboard should be setup as following procedure:

1. Check for DIP switch

the 8th of S1 „OFF”.

2. Press

CTRL + MENU. Check Slave KBD setting „ON”.

Network Set Slave KBD Slave KBD: ON

Network Set Slave KBD Slave KBD Unit: ON for the desired slave keyboard

Slave Keyboard need to be setup with the following procedure:

1. Check for dip switch

the 8th of S1 „ON”.

2. If you setup all connection correctly and turn on slave keyboard, you should see following screen.

Not connected

<– means that the controller is not connected to master keyboard.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Comentarios a estos manuales

Sin comentarios

Eneo KBD-2 Especificaciones Pagina 21

Comentarios a estos manuales