Eneo KBD-2 Especificaciones descargar pdf (Pagina 28)

6. Operation

6.1 Keyboard Lock/Unlock (Hidden command)

When the user leaves the control desk, he may wish to lock the keyboard controller to prevent unauthorized use.

Pressing 777 + ENTER will lock the keyboard controller. Pressing 777 + ENTER while the keyboard is locked will open the password screen. If the correct

password is entered, the keyboard controller will return to normal operation.

If the power is turned off and on while the keyboard is locked, it will ask for the password. Entering the correct password will cause the keyboard controller

to return to normal operation.

NOTE: If you forget your own passwords, turn off the keyboard controller, contact your distributor to get a 4-digit back door password.

This will change the passwords to the factory default. Contact your distributor to get the 4-digit back door password.

6.2 Controlling Multiplexer

Using a multiplexer allows more ﬂexibility in the types of cameras that can be used in a full system. Dome cameras and regular cameras can be mixed.

The keys PIP, 2x2, 3x3, 4x4, ZOOM, SET, etc., are keys that are used to operate the multiplexer.

6.2.1 Selecting Multiplexer

Duplex: Press MACRO/MENU key to enter Multiplexer set up menu and hold down the ENTER Key while navigating using the joystick.

(ENTER+Joystick).

Triplex: Push the Joystick upward with the ENTER pressed ENTER+Joystick) will show the Mux menu.

It will act like a mouse. Rotating the handle clockwise will act like the set key of the multiplexer. Rotating counterclockwise will act like the

ESC key

of the Multiplexer.

Selecting multiplexer (Mux ID No. + MUX)

Example: If the unit address of the Multiplexer is 128, you should press 1 2 8 + MUX to control the 128th Multiplexer.

6.2.2 Dome Camera Selection

Selecting camera (No. + CAM)

With these selections, the keyboard controller has full control of the selected camera if it is a dome camera.

Viewing full screen mode (Mux ID No. + MUX, Multiplexer video input No. + MAIN)

Select cameras 1 to 16 by pressing the camera number and then Main. The selected camera will appear in the full screen mode and is under control if it is a

dome camera.

Picture on Spot output monitor (SPOT No. + SPOT + Camera No. + ENTER)

Pressing SPOT No. + SPOT + Camera No. + ENTER will switch the selected camera number to the speciﬁc spot monitor output of the multiplexer.

The selected camera can be a dome camera or a standard camera. The Keyboard controller maintains control of the previously selected dome camera.

It does not change the main output of the multiplexer.

Example:

1 + MUX, 2 + SPOT + 12 + ENTER will switch camera 12 on multiplexer 1 to the spot output 2 of multiplexer 1.

2 + MUX, 1 + SPOT + 16 + ENTER will switch camera 16 on multiplexer 2 to the spot output 1 of multiplexer 2.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Comentarios a estos manuales

Sin comentarios

Eneo KBD-2 Especificaciones Pagina 28

Comentarios a estos manuales