Eneo DMR-104 Instrucciones de operaciones descargar pdf (Pagina 19)

Digital Video Recorder

y Forward: When in the pause mode, pressing the

button moves to the previous image. The button is also used

to Zoom In while in the PTZ mode.

y Rewind: Pressing the

button plays video backward at high speed. Pressing the button again toggles the playback

speed from

, and . The button is also used for Near Focus in the PTZ mode.

y Play/Pause: Pressing the

button plays back video at regular speed. The screen displays

when the DVR is

in the Pause mode and the screen displays

when the DVR is playing back video. The button is also used for Far

Focus in the PTZ mode.

y Fast Forward: Pressing the

button plays video forward at high speed. Pressing the button again toggles the

playback speed from

, and . The button is also used to load a Preset View in the PTZ mode.

y Search/Stop: Pressing the

button while in the Live Monitoring mode enters the Search mode. Pressing the

button while in the Search mode returns the DVR to the Live Monitoring mode. The button is also used to save

Presets while in the PTZ mode.

Jog Dial, Shuttle Ring

y Jog Dial: When in the playback mode, you can play video forward image-by-image by turning the Jog Dial clockwise

and backward image-by-image by turning the Jog Dial counterclockwise. When in the Setup mode, you can change

number values by highlighting the item in the menu and turning Jog Dial clockwise or counterclockwise to increase

or decrease the number.

y Shuttle Ring: The Shuttle Ring only functions in the Playback mode. The Shuttle Ring is spring loaded and returns

to the center position when released. Turning the ring clockwise plays video forward. Turning the ring counterclockwise

plays video backward. Playback speed varies with the amount the ring is turned. The playback speeds are

, ,

, x0.5, , , and

. When you release the ring, it snaps back to the center position and the video

pauses.

USB Port

Two USB ports on the front panel are provided to connect external hard disk or flash drives for video clip copying or

system upgrades. Position external drives close enough to the DVR so that you can make the cable connections, usually

less than 6 feet. Use the USB cable provided with the hard disk drive to connect it to the DVR.

A USB mouse (not supplied) can be connected to one of the ports. You can use the mouse to navigate through the

screens and menus much like you would on a computer.

A PostScript™ USB printer (not supplied) can be connected to one of the ports. You can print selected images resulting

from a search. Refer to Chapter 4 — Operation, Searching Video.

A USB to Serial converter can be connected to the USB port. Multiple text-in devices can be used with a USB to Serial

converter.

ID Button on Remote Control

If a DVR System ID is set to 0, the infrared remote control will control that DVR without any additional operations.

(Refer to the System General setup screen in this chapter for further information on setting the System ID.) If the system

ID is 1 to 16, you must to press the

ID button on the remote control and then press the number button (1 to 16) in order

to control that DVR. If the System ID of two or more DVRs is set to 0, those DVRs will react to the infrared remote

control at the same time.

Sequence Button on Remote Control

Pressing

SEQUENCE button displays live channels sequentially.

Clip Copy Button on Remote Control

Pressing the

CLIP COPY button allows you to copy video clips.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 87 88

Comentarios a estos manuales

Sin comentarios

Eneo DMR-104 Instrucciones de operaciones Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Eneo DMR-104