Eneo DMR-104 Instrucciones de operaciones descargar pdf (Pagina 59)

Digital Video Recorder

< Full Sequence >

< Cameo Sequence >

Selecting again in the Live Monitoring menu exits the Sequence mode. While in the Sequence mode, the icon

displays in bottom-left corner if Sequence is selected in the Display setup screen (OSD tab). If all the cameras in a

page are Off, or have lost video or are set to Covert (unless the user has authority to view covert cameras), that page

will be excluded from the sequence.

NOTE: The Full Sequence for the full sequence monitoring and the Cameo Sequence for the cameo sequence

monitoring should be selected in the Display setup screen (Primary Monitor tab).

Camera Menu

y PTZ: Selecting

(Camera Menu) → PTZ and choosing the camera number allows you to control the selected

camera as long as it has Pan, Tilt and Zoom capabilities. It is the same as pressing the

PTZ button. Refer to the

following PTZ Mode section for details.

y Zoom: Selecting

(Camera Menu) → Zoom and choosing the camera number zooms the current image of the

selected camera on the screen. It is the same as pressing the

ZOOM button. Selecting Zoom again in the Camera

Menu again exits the Zoom mode. Refer to the following Zoom Mode section for details.

y Audio: Selecting

(Camera Menu) → Audio toggles audio output On and Off.

y Color Control: Selecting

(Camera Menu) → Color Control and choosing the camera number allows you to

control brightness, contrast, hue and saturation for each camera for the selected camera if a user who has Color Control

authority logs into the system. It is the same as pressing and holding a camera button for a few seconds.

NOTE: It is important that cameras and monitors are correctly installed and adjusted prior to making any image

adjustments using the DVR’s controls.

Any image adjustments you make will be applied to both the live video on the monitors and the recorded

video.

The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the

live monitoring mode.

y Spot Monitor: Selecting Spot Monitor allows you to select the camera you want to display on a Spot monitor.

Refer to the following Spot Monitoring section for details.

Selecting

(Search) in the Live Monitoring menu exits the live monitoring mode and enters the search mode. It is

the same as pressing the

(Search/Stop) button.

Setup

Selecting

(Setup) in the Live Monitoring menu enters the Main Setup screen. Refer to Chapter 3 ─ Configuration

for detailed descriptions of system setup.

Active Cameo Mode

You can enter the Active Cameo mode by selecting Edit Group from the Live Monitoring – Display menu or pressing

button on the front panel in any multi-view format. The yellow outline surrounding the video indicates the active

cameo, and pressing the arrow buttons moves the active cameo. Pressing the

button exits the Active Cameo mode.

Selecting Exit Group Edit in the cameo menu displayed when pressing the

MENU button also exits the Active Cameo

mode. The active cameo mode will remains in effect for 15 seconds if there is no further operation.

In active cameo mode, press the button for the camera you want to display in the active cameo. After setting the camera

number to active cameo, the DVR moves the active cameo to the next cameo. When the camera number exists on the

current screen, the active cameo is changed with the existing camera number. When the camera number does not exist

on the current screen, the active cameo is replaced by the camera number. You can change the screen layout in this way.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 87 88

Comentarios a estos manuales

Sin comentarios

Eneo DMR-104 Instrucciones de operaciones Pagina 59

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Eneo DMR-104