Eneo DMR-104 Instrucciones de operaciones descargar pdf (Pagina 60)

User’s Manual

Zoom Mode

You can enlarge an area of the video by pressing the

ZOOM button. For a few seconds after pressing the ZOOM button,

a rectangle displays on the screen. A rectangle shows the area that will be enlarged. You can move the rectangle around

using the arrow buttons. Pressing the

button or turning the Jog Dial counterclockwise in the Zoom mode toggles

the zoom size between 2x, 3x and 4x. Exit the Zoom mode by pressing the

ZOOM button. While in the Zoom mode,

the icon displays if Zoom is selected in the Display setup screen (OSD tab).

NOTE: Entering the zoom mode will NOT be supported while in the SD display mode.

PTZ Mode

If a user who has PTZ Control authority logs into the system, the user can control PTZ cameras. The DVR will control

cameras with Pan, Tilt and Zoom capabilities. Press and hold the

PTZ button to display the PTZ camera menu and enter

the PTZ mode, and press the button again to exit the PTZ mode.

Select the PTZ camera you wish to control by selecting it from the menu. The icon

displays on the PTZ camera screen.

To use the front panel buttons, press the Left and Right arrow buttons to pan left and right. Press the

Up and Down arrow buttons to tilt the camera up and down. Press the

button to zoom in, and

press the

button to zoom out. You can use the

and buttons to focus the image.

You can establish preset positions for PTZ cameras. Press the to establish Presets.

You can quickly move PTZ cameras to Preset positions. Press the to view an established camera

Preset position.

Figure 42 : PTZ Select Camera menu.

You can save camera position settings as “presets” so that you can go directly

to desired views.

Once you have the camera at the desired settings, press the

button, and

the Set Preset dialog box will appear. Select the number you want to assign

to the preset and press the

button. Use the virtual keyboard to enter the

preset name.

Press the button to load the PTZ preset and the Move to Preset dialog box

will appear. Select the desired preset and press the

button to load the preset.

< Set Preset >

< Move to Preset >

Figure 43 : PTZ Preset menu.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 87 88

Sin comentarios

Eneo DMR-104 Instrucciones de operaciones Pagina 60