
User’s Manual
66
NOTE: During Clip Copy, you cannot shut the system down, clear data on the storage device, or format the
storage device.
CAUTION: Do NOT disconnect the USB cable or the power from the external drive while copying
video clips. If the external drive is shut down or the USB cable is disconnected while
copying video clips, THE DVR SYSTEM MAY NOT WORK NORMALLY OR THE EXTERNAL
DRIVE COULD BE DAMAGED, and you will get an error message the next time you try
to copy video clips. You will need to power down the DVR and restart it to get rid of the
error message. Once the file system of the USB hard disk drive has been corrupted, this
error message cannot be dismissed. Even after restarting the DVR it may automatically
restart while preparing to clip copy. You must recover the file system using the recovery
program, or you must reformat the hard disk drive.
Print
You can print images on a printer. Connect a PostScript™ printer, or external hard disk drive or flash drive to one of
the USB ports.
Highlight the box beside Printer Model and press the
button. Selecting
PostScript Printer will print images on a PostScript™ printer connected
to the DVR. Selecting File Printer will save the current image as a PDF
file on an external USB hard disk drive or flash drive.
NOTE: Images saved as PDF files can be printed on any printer
connected to your PC.
Highlight the box beside Paper Size and press the button. You can
select the paper size.
Figure 52 : Print screen.
Once you have selected the printer model and paper size, highlight the Print button and press the
button. A message
appears asking you if you want to print the current image. Highlight the Continue button and press the
button to print.
NOTE: If your printer only supports an LPT connection (parallel), use an LPT to USB converter cable. The printer
cable is not provided.
Comentarios a estos manuales